Skip to main content
Application 03 / 07

Smart Classroom PCBA Assembly for Teaching Equipment

Interactive panels, learning terminals and classroom controllers are used by many hands every day. We build the Android control boards behind them with SMT and mixed assembly, and screen them with ICT, FCT and aging test so a lesson is not interrupted by a board failure.

Pain Points in Classroom Electronics

Education hardware has its own usage pattern.

Repeated power cycles

Equipment is switched on and off every school day — weak joints show up early.

Frequent plugging

Student use puts stress on connector and through-hole joints on the board.

Android SoC packages

BGA and QFN devices need X-Ray verification, not only optical inspection.

Room environment

Dust and humidity in classrooms make conformal coating a useful option.

Process Route

Design file intake

Send BOM and Gerber files by email. We review, quote within 24–48 hours and sign NDA on request before your board enters the line.

Android board SMT

SMT places BGA, QFN, 0201 and 01005 components; DIP is added on mixed boards where connectors need through-hole strength.

Hidden-joint inspection

AOI after reflow and X-Ray on BGA joints, holding void rate below 15% including 0.3mm BGA work.

Verification and finish

ICT and FCT verify the board; aging test and optional conformal coating prepare it for daily classroom use.

Android smart classroom control board assembly — image placeholder
Representative mainboard

Android control board

Classroom panels and learning devices in our factory are commonly built on Android mainboard platforms. We state platform capability only; board-level parameters belong to your design and are confirmed during the file review.

See the four platform families →

Test Plan

Batch-level COC records follow every lot through IQC, IPQC and OQC.

ICT

Checks component placement and solder continuity across the control board.

FCT

Functional test covers the interfaces used by the panel, touch layer and peripherals.

Aging test

Powered screening catches failures that would otherwise appear after installation.

Delivery & Documentation

Boards are assembled in our 2,600㎡ single-floor Shenzhen facility under ISO9001:2015, with a factory yield of 99.7% or higher. Each delivery includes batch-level COC. For a protected classroom equipment program, email yun@dhc-pcba.com — we respond within 24–48 hours.

Quote a classroom control board

24–48h response · NDA on request · BOM/Gerber by email.