Skip to main content
Application 07 / 07

5G Base Station PCBA Assembly for Continuous Operation

Base station control boards are installed where access is difficult and uptime matters. Our SMT and DIP lines, X-Ray inspection and aging test are organised around producing assemblies that can be trusted in continuously running infrastructure.

Pain Points in Infrastructure Boards

Long service life changes the manufacturing priorities.

Continuous duty

Boards operate around the clock, so early-life failures must be screened out before installation.

Fine-pitch devices

BGA and QFN packages with 0.3mm BGA capability need X-Ray verification.

Mixed technologies

RF sections and power connectors often require both SMT and DIP on one assembly.

Outdoor exposure

Conformal coating is available where equipment faces moisture or dust.

Process Route

File review under NDA

Send BOM and Gerber files by email. We quote within 24–48 hours, and sign NDA on request for infrastructure programs.

SMT and DIP assembly

BGA down to 0.3mm, QFN, 0201 and 01005 components are placed with controlled profiles; DIP covers through-hole connectors and power parts.

X-Ray and inspection

AOI covers placements and X-Ray verifies BGA joints, keeping void rate below 15%.

Test, coat and pack

ICT and FCT validate the board; aging test and optional conformal coating prepare it for continuous field operation.

Base station control board assembly — image placeholder
Representative mainboard

Industrial control board

Infrastructure assemblies in our factory are typically control boards on industrial platforms. We do not publish unconfirmed board specifications — send your design files and our engineers will confirm the assembly and test route.

See all mainboard platforms →

Test Plan

Batch-level COC is issued through IQC, IPQC and OQC.

X-Ray

Hidden BGA joints inspected with void rate below 15%.

ICT + FCT

Electrical and functional checks on every assembled lot.

Aging test

Powered screening for boards intended to run without interruption.

Delivery & Documentation

Assembly is carried out in our 2,600㎡ Shenzhen facility under ISO9001:2015, with a factory yield of 99.7% or higher. Each shipment includes batch-level COC. For a protected 5G infrastructure program, contact yun@dhc-pcba.com — we respond within 24–48 hours.

Quote a base station control board

24–48h response · NDA on request · BOM/Gerber by email.