Skip to main content
Application 02 / 07

POS Terminal PCBA Assembly for Retail Hardware

Payment terminals pack card readers, displays, communication modules and connectors into a small enclosure. Our SMT lines handle the fine-pitch devices; DIP and mixed assembly cover the through-hole connectors; FCT checks the interfaces your enclosure depends on.

Pain Points in POS Mainboards

Small boards create outsized assembly problems.

Dense interfaces

Peripheral connectors leave little room for placement tooling — mixed assembly needs careful sequencing.

Fine-pitch devices

QFN and BGA packages, down to 0.3mm BGA, hide solder defects under the component body.

Micro-components

0201 and 01005 parts demand controlled stencil printing and placement accuracy.

Counter and field use

Daily handling and occasional liquid exposure make reliable assembly and coating worthwhile.

Process Route

File and package review

Email BOM and Gerber files to yun@dhc-pcba.com. We review footprints and return a quotation within 24–48 hours; NDA is signed on request before production starts.

High-density SMT

0201 and 01005 components, QFN and 0.3mm BGA devices are placed with controlled profiles; AOI inspects after reflow.

X-Ray under the packages

X-Ray inspection verifies hidden joints and keeps BGA void rate below 15%.

DIP and functional verification

Through-hole connectors are assembled, then ICT and FCT check the board before optional conformal coating and final packing.

X86 POS terminal mainboard assembly — image placeholder
Representative mainboard

X86 POS control board

X86 is the platform most often associated with payment terminals in our assembly work. We describe platform capability, not invented board specifications — send your BOM and Gerber files and we will confirm the process route for your design.

Compare all mainboard platforms →

Test Plan

IQC → IPQC → OQC with batch-level COC on every lot.

AOI + X-Ray

Top-side inspection plus X-Ray for BGA void rate below 15%.

ICT + FCT

In-circuit checks and functional tests that exercise the terminal's external interfaces.

Aging test

Powered screening for boards that will be used at a counter for years.

Delivery & Documentation

Assembly is performed in our 2,600㎡ Shenzhen facility under ISO9001:2015, with a factory yield of 99.7% or higher. Conformal coating is available for terminals used in wet or dusty environments. Every shipment carries batch-level COC; contact yun@dhc-pcba.com to start a protected program.

Quote a POS terminal mainboard

24–48h response · NDA on request · BOM/Gerber by email.